Cisco 800 Series Podręcznik projektowania - Strona 41

Przeglądaj online lub pobierz pdf Podręcznik projektowania dla Bezprzewodowy punkt dostępowy Cisco 800 Series. Cisco 800 Series 50 stron. Fast step software design guide
Również dla Cisco 800 Series: Informacje o wersji (36 strony), Skrócona instrukcja obsługi (13 strony), Skrócona instrukcja obsługi (17 strony), Konfigurowanie (32 strony)

Additional Flags and Parameters

AutomaticWANIPAddressDiscoverISP

CentralRouterISP

CentralRouterRCN

DHCPLeaseDaysOnE0

DHCPLeaseHoursOnE0

OL-10373-02

C H A P T E R

Enables the IP control protocol (IPCP) for WAN IP

address negotiation. Discovery of the Integrated Services

Digital Network (ISDN) WAN IP address for the router

is negotiated from the central site; it is not a statically

addressed WAN connection.

If the value is 6, IPCP is enabled. If the value is 3, the

router uses a static IP address.

The remote router name used by Point-to-Point Protocol

(PPP) for connecting to an Internet service provider. For

an ISDN connection, this flag is optional. However, if

internal servers are present on an ISDN connection, this

flag must be given a value. For serial leased-line

connections, this flag must be given a value if the

UserNameISP and PasswordISP flags are given values.

The remote router name used by PPP for connecting to a

remote corporate network. For an ISDN connection, this

flag is optional. However, if internal servers are present

on an ISDN connection, this flag must be given a value.

For serial leased-line connections, this flag must be given

a value if the UserNameRCN and PasswordRCN flags

are given values.

Number of days for the Dynamic Host Configuration

Protocol (DHCP) lease. This flag is used only when the

router is configured as a DHCP server. (Used with the

DHCPLeaseMinsOnE0 and DHCPLeaseHoursOnE0

flags.)

Number of hours for the DHCP lease. This flag is used

only when the router is configured as a DHCP server.

(Used with the DHCPLeaseMinsOnE0 and

DHCPLeaseDaysOnE0 flags.)

Cisco 800 Fast Step Software Design Guide

A-1