Cisco AIR-AP1020 - 1000 Series Lightweight Access Point Skrócona instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Cisco AIR-AP1020 - 1000 Series Lightweight Access Point. Cisco AIR-AP1020 - 1000 Series Lightweight Access Point 44 stron. Aironet 1000 series ieee 802.11a/b/g lightweight access points with external antennas

Drukuj stronę

ATTENTION!

While Cisco Aironet 1000 Series IEEE 802.11a/b/g lightweight access points have been engineered for
easy installation, there are some very important guidelines for installation:
•
•
•
•
•
Figure 1
•
AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide
78-17147-01
PLACE Cisco Aironet 1000 Series Lightweight Access Points NO MORE THAN 140 FEET APART
FROM EACH OTHER. Placing Cisco Aironet 1000 Series 802.11a/b/g lightweight access points
farther apart almost always results in poor coverage.
DO NOT MOUNT Cisco Aironet 1000 Series Lightweight Access Points OUTSIDE BUILDINGS.
DO NOT MOUNT Cisco Aironet 1000 Series Lightweight Access Points ON BUILDING
PERIMETER WALLS UNLESS THE OPERATOR WANTS TO PROVIDE COVERAGE OUTSIDE
THE BUILDING.
BE SURE that plenum-mounted Cisco Aironet 1000 Series 802.11a/b/g lightweight access points
are powered using Power over Ethernet (PoE) and use only the metal brackets (not the
Ceiling-Mount Base or the Hanging-Ceiling Clips) to comply with safety regulations.
BE SURE THAT Cisco Aironet 1000 Series Lightweight Access Points ARE INSTALLED
VERTICALLY as shown in
access points vertically either standing up in a plenum or hanging from a ceiling, creates the largest
coverage area per Cisco Aironet 1000 Series lightweight access point. Hanging Cisco Aironet 1000
Series 802.11a/b/g lightweight access points from the ceiling provides the best RF coverage.
Access Point Installed Vertically
DO NOT MOUNT Cisco Aironet 1000 Series lightweight access point ANTENNAS WITHIN ONE
METER (3 FT.) OF ANY METAL OBSTRUCTIONS. THE RF WAVES FROM Cisco Aironet 1000
Series Lightweight Access Points ARE BLOCKED AND/OR REFLECTED BY METAL OBJECTS
Figure
1. Installing Cisco Aironet 1000 Series 802.11a/b/g lightweight
Installation and Configuration
2