CABASSE SWELL Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki CABASSE SWELL. CABASSE SWELL 12 stron.

TRUE WIRELESS

Use the True Wireless function to connect your SWELL speaker wirelessly with another SWELL as a second audio source in

the same room. You have to choose between two modes: Stereo mode, in which SWELL A plays the sound signal of the

left channel and SWELL B plays the sound signal of the right channel (as with a traditional stereo system) and Party mode.

AUX

V-

AUX-IN TRUE WIRELESS

In True Wireless mode the AUX input can also be used.

For this you have to select the AUX input on the SWELL to

which the 3.5 mm jack is connected. The second SWELL

remains set on Bluetooth® input.

Note: once the true wireless mode is activated, simply press the Bluetooth button and

release it after approx. 4 seconds on each SWELL to change the mode: Stereo Mode

Left, Stereo Mode Right, Party Mode.

AUX

V+

Note: The last True Wireless status is saved in both devices

and can only be deleted by pressing the Bluetooth® and

Mute buttons simultaneously. In other words, when both

devices are switched on they connect with each other

automatically if they are within range.

PAIRING SPEAKERS TOGETHER

AUX CONNECTION

If your mobile device has a Line-Out or headphone out-

put, it can be connected to SWELL via the AUX-IN using an

optional 3.5 mm mini-jack, as follows:

a) Plug the jack into the mobile device.

b) Plug the jack into the SWELL AUX-IN.

c) Switch on the SWELL by pressing the power button.

V-

V+

d) Select the AUX input.

e) Press Play on the mobile device.

f) In AUX mode, the volume is not synchronized between

the SWELL and the mobile device. To achieve the maximum

possible volume, turn the volume on the SWELL to maxi-

mum and select the desired volume on the mobile device.

Note: To reduce power consumption of your SWELL, the

Bluetooth® connection in AUX mode will be disconnected

automatically.

Note: Before unplugging the jack from the mobile device

once you have finished playback, either lower the vo-

lume on SWELL or switch it off.

AUX

STEREO MODE

Stereo mode, in which SWELL A plays the sound signal of the

left channel and SWELL B plays the sound signal of the right

channel (as with a traditional stereo system).

Activate Stereo mode as follows:

a) Switch on both SWELL speakers by pressing their power

buttons.

b) Select the Bluetooth® input of SWELL A (LED flashing or

steady blue).

c) On SWELL A briefly press the "Bluetooth®" and "V-" but-

tons at the same time. You will hear the voice message "True

Wireless Pairing".

e) Within 5 seconds a signal tone can be heard on SWELL A.

f) On SWELL B select the Bluetooth® input (LED flashing or

steady blue).

g) On SWELL B briefly press the "Bluetooth®" and "V+" but-

tons at the same time. You will hear the voice message "True

Wireless Pairing".

h) The connection has been successful when the voice mes-

sage "Stereo Mode Left" comes from SWELL A and "Stereo

Mode Right" comes from SWELL B, and the LEDs in the center

pad of SWELL A and B turn from flashing blue to steady blue.

SWELL A

V-

V+

Swell A plays as left speaker, Swell B as right speaker

SWELL B

AUX

V-

V+