Cisco AIR-AP1800I-Z-K9 Podręcznik dla początkujących - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Bezprzewodowy punkt dostępowy Cisco AIR-AP1800I-Z-K9. Cisco AIR-AP1800I-Z-K9 43 stron.
Drukuj stronę
Access Point Features
A full listing of the access point's features and specification are provided in the Cisco Aironet 1800i
Access Point Data Sheet at the following URL:
https://www.cisco.com/c/en/us/support/wireless/aironet-1800i-access-point/model.html
The features of the 1800i access points are as follows:
• Supported mode(s) of operation at release:
Unified (or Local)
–
• Two omnidirectional integrated 2.4 GHz dual-band antennas and 5 GHz single band antennas.
Peak antenna gain is approximately 3 dBi and 5 dBi in 2.4 GHz and 5 GHz bands respectively.
• Radio features supported are:
2.4 GHz and 5 GHz concurrent radios
–
2 GHz radio with 2TX x 2RX and two spatial streams SU-MIMO
–
5 GHz radio with 2TX x 2RX 802.11ac Wave 2 capable with two spatial streams SU-MIMO
–
and MU-MIMO
802.11ac based Explicit Transmit Beamforming
–
Quality of Service (QoS)
–
Radio Resource Management (RRM)
–
Rogue Detection
–
BandSelect
–
• The AP supports the following external interfaces:
One 10/100/1000 BASE-T (Ethernet) Uplink Interface with inline power capability,
–
Auto-MDIX (automatically support either straight through or crossover cables), and
802.3af/at PoE-In.
UART console port connection using the custom UART–RJ45 console cable adapter,
–
AIR-CONSADPT=. This adapter is available from Cisco.
• Reset button. For information on how to use the Reset button, see
section on page
• One multi-color LED status indicator. See the
page 19
for information on the colors of the LED status indicator.
4
21.
"Checking the Access Point LED" section on
"Using the Reset Button"