Cisco AIR-CAP1552WU-x-K9 Instrukcja instalacji - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Bezprzewodowy punkt dostępowy Cisco AIR-CAP1552WU-x-K9. Cisco AIR-CAP1552WU-x-K9 24 stron. Cisco aironet 1550 series for hazardous locations
Drukuj stronę
:: Seite 16 von 24 :: Datenblatt zum Produkt Cisco Cisco Aironet for hazardous locations - mit DC# 790021 ::
Hardware Features
Caution
Fiber Option
Note
Warning
Note
Metal Enclosure
Optional Hardware
Cisco Aironet 1550 Series for Hazardous Locations Installation Guide
1-16
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail ([email protected]) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=790021
To provide inline PoE, you must use the 1500 power injector (AIR-PWRINJ1500-2=). Other power
injectors, PoE switches, and 802.3af/at power sources cannot provide adequate power, which may cause
the access point to malfunction and cause possible over-current conditions at the power source.
The 1552WU access point does not support Fiber.
Class 1 laser product. Statement 1008
The factory-orderable fiber option provides a fiber input and output capability. Fiber data is transmitted
and received over a dual-strand fiber cable, which is connected to the access point using these SFP
modules:
100BASE-BX10-U fiber Rugged small-form factor pluggable (SFP) module
•
1000BASE-LX single-mode Rugged SFP module
•
1000Base-SX multimode Rugged SFP module
•
SFP modules are not hot-swappable.
The access point has one fiber connection, located on the bottom of the unit (shown on
Client data is passed to the network controller through the fiber connection via a fiber-capable switch or
controller. Configuration information can be found in the controller configuration guide of the switch or
controller you are using.
The access point uses a metal enclosure that can accommodate both indoor or outdoor operating
environments and an industrial temperature operating range of –40 to 131°F (–40 to 55°C). The access
point complies with NEMA 4 and IP67 requirements.
Depending on what you ordered, the following optional access point hardware may be part of your
shipment:
Cisco Aironet Antennas
•
Pole mount kits (AIR-ACCPMK1550=, AIR-ACCPMK1550HZM=)
•
Band installation tool for pole mount kit (AIR-BAND-INS-TL=)
•
Power injector (AIR-PWRINJ1500-2=)
•
1000BASE-LX single-mode Rugged SFP (GLC-LX-SM-RGD=)
•
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
Chapter 1
Overview
Figure
1-2) .