Cisco AIR-LAP1310G Instrukcja montażu - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Bezprzewodowy punkt dostępowy Cisco AIR-LAP1310G. Cisco AIR-LAP1310G 40 stron. Cisco aironet 1300 series lightweight outdoor access point
Drukuj stronęMounting the Access Point
Rooftop Support or Small Mast Diameters
Use this procedure to attach the mounting bracket to the rooftop support or to a mast with a diameter
between 1.25 and 2.75 inches (30.5 to 69.9 mm). For masts other than the rooftop support, use U bolts
that fit the mast in use.
To attach the mounting bracket to the rooftop support or small mast, follow these steps:
Position the mounting bracket next to the mounting pole so that the arrow on the bracket points up.
Step 1
Figure 12
1
1
2
3
Attach the mounting bracket to the mast using two U bolts and four nuts and washers.
Step 2
Note
Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions
30
Mounting Bracket Assembly for Rooftop Support
1 5
0
1 5
6
M O
U N
T
U P
5
U bolt
Mounting bracket
Flat washer
If you are using the integrated antenna, loosely tighten the U bolts so you can adjust the access
point horizontally for antenna positioning.
2
3
4
4
Hex nut
5
Roof mounting mast
6
Hang pin slot
78-17634-01