Cisco Aironet 1520 Series Podręcznik dla początkujących - Strona 23
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Bezprzewodowy punkt dostępowy Cisco Aironet 1520 Series. Cisco Aironet 1520 Series 37 stron. Outdoor mesh access point
Również dla Cisco Aironet 1520 Series: Instrukcja instalacji sprzętu (50 strony), Podręcznik (27 strony)
Drukuj stronę
Verifying the Wireless LAN Controller Mode
Follow these steps to verify that the wireless LAN controller mode is set to Layer 3:
Open your web-browser and enter the IP address of your wireless LAN controller. Be sure to
Step 1
precede the IP address with https://. A login screen appears.
Enter your username and password. The default case-sensitive username and password are
Step 2
admin and admin. The Summary page appears.
From the top menu bar, click CONTROLLER. The Controller General page appears.
Step 3
Step 4
Verify that the LWAPP Transport Mode is set to Layer 3. If it is not, change it to Layer 3 and
click Apply.
Save any changes you made.
Step 5
Step 6
From the menu bar, click MONITOR to return to the Monitor Summary page.
Verifying the Wireless LAN Controller Software Version
On the Summary page, you can verify the software version that the wireless LAN controller is running.
If a version update is necessary, refer to the appropriate controller configuration documentation.
Recording the Access Point MAC Address
Use a text file to record the MAC address of all the access points you intend to deploy in your network.
Having a file of access point MAC addresses will be of considerable value for future testing. While you
are compiling the list, you might want to change the name of the access point to something you can
easily remember. The name can contain up to 32 characters. The following example, fisher_street:ea:co
contains the last four HEX characters of the access point MAC address.
Adding the Access Point MAC Address to the Wireless LAN Controller
Filter List
The wireless LAN controller maintains an access point authorization MAC address list and responds
to discovery requests from access points on that list. Follow these steps to add the access point MAC
address (or MAC addresses) to the Wireless LAN controller filter list:
If you are not logged onto the wireless LAN controller, log on now. The Summary page
Step 1
appears.
On the menu bar, click SECURITY. The Security RADIUS Authentication Server page
Step 2
appears.
23