Cisco Aironet 1570 Series Instrukcja zamawiania - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja zamawiania dla Bezprzewodowy punkt dostępowy Cisco Aironet 1570 Series. Cisco Aironet 1570 Series 17 stron. Outdoor access point
Również dla Cisco Aironet 1570 Series: Instrukcja instalacji sprzętu (10 strony)
Drukuj stronęSoftware Ordering Options
The 1570 Series requires, at a minimum, AP software release 8.0MR or later (see Table 5). Traditionally, additional
functions are available for the AP with more recent releases. Please see the applicable release notes for more
information about features available with the latest software releases. You can specify the AP to be loaded and
shipped with the default unified software as either "unified mesh" (SW1570-UM01A01-K9) or "unified local"
(SW1570-UL01A01-K9) mode during the ordering process.
Table 5.
Part Number
SW1570-UM01A01-K9
SW1570-UL01A01-K9
4. Cisco Aironet 1570 Series Components
Antennas
The Aironet 1572IC access point has four internal dual-band (2.4- and 5-GHz) antennas that reside under a sealed
random and cannot be accessed or configured by the user.
The Aironet 1572EAC and 1572EC access points are equipped with four separate N-type female connectors that
carry dual-band signals or, through software control, can be configured such that the bottom pair of connectors
carry only 2.4-GHz signals and the top pair carry only 5-GHz signals. This gives users multiple configuration
options, as shown in Figure 1.
Figure 1.
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Minimum AP Software Releases
Minimum Software Release
SW Cisco AP1570: Unified Mesh (e.g., 8.0.xxx) + IOS (e.g., 15.2.4-yyy); IOS added when available
SW Cisco AP1570: Unified Local (e.g., 8.0.xxx) + IOS (e.g., 15.2.4-yyy); IOS added when available
Antenna Configuration Options
Page 5 of 17