Epson W75 Szybka konfiguracja - Strona 3

Przeglądaj online lub pobierz pdf Szybka konfiguracja dla Projektor Epson W75. Epson W75 4 stron.

Drukuj stronę

•

If you see a blank screen when a computer is connected, check the

following:

•

laptops, you may need to hold down the Fn key

On some Windows

and press F7 or the function key that lets you display on an external

monitor. It may be labeled CRT/LCD or have an icon such as

On Windows 7 or later, hold down the Windows key and press P at

the same time, then click Duplicate.

•

If you're using a Mac laptop, open System Preferences and

select Displays. Click the Arrangement tab and select the Mirror

Displays checkbox.

•

If the projector does not respond to remote control commands, make sure

the batteries in the remote control are installed correctly. Replace the

batteries if necessary.

•

The projector's USB power cable can provide 2.0A of power. Make sure

your streaming device supports this specification.

Registration

online at www.epson.com/webreg.

Where to get help

Manual

For more information about using the projector, you can view or download the

online manual from the Epson website, as described below.

Internet support

Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada)

and search for your product for solutions to common problems. You can

download utilities and documentation, get FAQs and troubleshooting advice,

or e-mail Epson.

Telephone support services

To use the Epson

PrivateLine

Support service, call (800) 637-7661. This service

is available for the duration of your warranty period. You may also speak with a

support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6

to 8

, Pacific Time, Monday through Friday, and 7

to 4

, Pacific Time, Saturday. Days and hours of support are subject to change

without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User's Guide.

You can purchase accessories from an Epson authorized reseller. To find the

nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online

at www.epsonstore.com (U.S. sales) or www.epsonstore.ca (Canadian

sales).

Notices

Bluetooth Safety and Specifications

Contains Bluetooth

module model: DBUB-E207

This document provides safety instructions and describes the specifications. Read this

document carefully before use to ensure your safety and product performance.

Data transmission is always initiated by software, which is the passed down through

the MAC, through the digital and analog baseband, and finally to the RF chip. Several

special packets are initiated by the MAC. These are the only ways the digital baseband

portion will turn on the RF transmitter, which it then turns off at the end of the packet.

Therefore, the transmitter will be on only while one of the aforementioned packets is

being transmitted. In other words, this device automatically discontinues transmission in

case of either absence of information to transmit or operational failure.

This equipment is restricted to indoor operation only.

U.S. FCC Notices

Contains FCC ID: BKMAE-E207

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause interference to radio and television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

WARNING: The connection of a non-shielded equipment interface cable to this

equipment will invalidate the FCC Certification or Declaration of this device and

may cause interference levels which exceed the limits established by the FCC for this

equipment. It is the responsibility of the user to obtain and use a shielded equipment

interface cable with this device. If this equipment has more than one interface connector,

do not leave cables connected to unused interfaces. Changes or modifications not

expressly approved by the manufacturer could void the user's authority to operate the

equipment.

Industry Canada (IC) Notices

Contains IC: 1052D-E207

CAN ICES-3 (B)/NMB-3 (B)

This device complies with Industry Canada's license-exempt RSSs. Operation is subject

to the following two conditions: (1) This device may not cause interference; and (2) this

device must accept any interference, including interference that may cause undesired

operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment should be installed and operated keeping the radiator at least 20 cm

(7.9 inches) or more away from person's body.

Supplier's Declaration of Conformity

According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or

CPU Boards and Power Supplies used with Class B Personal Computers:

We:

Epson America, Inc.

Located at:

3840 Kilroy Airport Way

MS: 3-13

Long Beach, CA 90806-2469

Telephone:

(562) 981-3840

Declare under sole responsibility that the product identified herein, complies with

47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,

is identical to the representative unit tested and found to be compliant with the

standards. Records maintained continue to reflect the equipment being produced can

be expected to be within the variation accepted, due to quantity production and testing

on a statistical basis as required by 47CFR §2.906. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Trade Name:

Epson

Type of Product:

LCD Projector

Model:

HA20A

Marketing Name:

PowerLite W70/W75

Options:

Product name

Remote controller

Epson America, Inc. Limited Warranty

Two-Year or 7,500-hour Projector Limited Warranty

A. What Is Covered: Epson America, Inc. ("Epson") warrants to the purchaser of the

Epson product enclosed with this limited warranty statement that the product, if

purchased and operated in the United States, Canada, or Puerto Rico, will be free

from defects in workmanship and materials for a period of two (2) years from the

date of original purchase or 7,500 hours of use, whichever occurs first.

B. What Epson Will Do To Correct Problems: If your product requires service during

the limited warranty period, please call Epson at the number at the end of this

statement and be prepared to provide the model, serial number, and, if required,

date of original purchase. This line will be answered during Epson's regular support

hours (currently 6:00

to 4:00

on Saturday - subject to change). You may also need to provide proof

of purchase if warranty coverage cannot be verified by the serial number. If Epson

confirms warranty service is required, Epson will, at its option, exchange or repair

the product without charge for parts or labor. If Epson authorizes an exchange for

the defective unit, Epson will ship a replacement product to you, freight prepaid,

as long as you use an address in the United States, Canada, or Puerto Rico. The

replacement product may be new or refurbished to the Epson standard of quality.

(The replacement product may not include promotional materials, accessories,

documentation, manuals, software, or cables.) You are responsible for securely

packaging the defective unit and returning it to Epson within five (5) working days

of receipt of the replacement. Epson requires a debit or credit card number to secure

the cost of the replacement product in the event that you fail to return the defective

one. If Epson authorizes repair instead of exchange, Epson will direct you to send your

product to Epson or its authorized service center, where the product will be repaired

and sent back to you. You are responsible for securely packaging the product and

for all postage or shipping costs to and from the Epson authorized service center.

When warranty service involves the exchange of the product or of a part, the item

Model

2192767xx (x = 0-9)

to 8:00

, Pacific Time, Monday through Friday, and 7:00