argenta APE 800 Instrukcja obsługi i konserwacji - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Piec argenta APE 800. argenta APE 800 16 stron. Burn-out furnaces

Burn-out furnace APE800 and APE800a

8.4. Launching the programme with a delay

In order to start the programme with a time delay one should follow the

undermentioned instruction.

sign

description

Turn on the power supply with the knob at the front of the temperature driver and wait

a moment till the box below appears.

This screen shows the current temperature in the furnace chamber. The temperature

must not be higher than 150

With the keys

following key:

While the delay function is in operation this state is indicated with the flashing sign S1

or S2. After this time the driver starts completing the default programme.

In order to stop the current programme one should follow the undermentioned

procedure.

sign

description

While the programme is in operation press the following key:

Press the

The current programme will be stopped, the program selector will return to the main

box and it will show the current temperature in the furnace chamber.

WARNING: Another launching will be possible only after the temperature is lower than

150

to delay the start of programme no. 1 press and hold the following key

to delay the start of programme no. 2 press and hold the following key

and

set the delay time counting in hours and confirm it with the

key till the sign

*the analogous situation concerns programme no. 2

appears, then press the following key:

2008-06-18