argenta APE 800a Instrukcja obsługi i konserwacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Piec argenta APE 800a. argenta APE 800a 16 stron. Burn-out furnaces

Burn-out furnace APE800 and APE800a

4. Basic technical parameters of the furnace

Nominal voltage

Nominal power

Anti-electrocution protection

Degree of protection

Maximum work temperature

Maximum temperature increase

Amount of programmes

Amount of cycles in the programme

Furnace chaber dimensions

Outer dimensions

Integral mass of the furnace

The furnace connection can be performed only by a qualified electrician and only with

the application of all security measures. The furnace is powered with the use of a three-wire

power grid with a single-phase current. The machine is equipped with a reinforced, single-

phase plug and a suitable socket.

If it is the first launching of the furnace it is advisable to dry the heating chamber. To

perform this action a short programme should be set on the program selector (the first

section). It covers heating with the maximum temperature increase up to 700

temperature is reached, the furnace can be turned off. This function should be initiated

only in the target operating area of the furnace, with the activated travelator. During the

first heating the insulating mats of the furnace will change their colour, which indicates

that the drying process proceeds in a correct way.

230V / 50Hz

2800W

IP21

800

APE800: 400 x 450 x 270[mm]

APE800a: 280x300x230[mm]

APE800: 700 x 640 x 530[mm]

APE800a: 500x530x570[mm]

APE800: 43kg

APE800a: 38kg

Fig.2. Electric connection diagram.

C/min

8888

2008-06-18

8888

C. After the