DigitaLinx DL-HD2-RX Podręcznik szybkiej instalacji - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik szybkiej instalacji dla Odbiornik DigitaLinx DL-HD2-RX. DigitaLinx DL-HD2-RX 8 stron.
Również dla DigitaLinx DL-HD2-RX: Instrukcja obsługi (13 strony)

Drukuj stronę
HDBaseT Cabling
To ensure proper performance of the DL-HD2-RX, it is recommended that you use solid core,
shielded Category 6 F/UTP cabling at a minimum. Category 5e F/UTP may perform well but
may not support power over HDBaseT reliably.
For optimized performance use the following Liberty Wire and Cable branded cabling;
UHD @ 70m / 230'
UHD @ 100m / 300'
1
8

Cabling Requirements

When using shielded category cabling ALWAYS...
....use shielded connectors
....properly ground the category cable
Category 6 plenum; 24-4P-P-L6SH
Category 6 NON-plenum; 24-4P-L6SH
Category 6A plenum; 24-4P-P-L6ASH
Category 6A NON -plenum; 24-4P-L6ASH
TIA/EIA-568B
Pin 1
Orange/White
Pin 2
Orange
Pin 3
Green/White
Pin 4
Blue
Pin 5
Blue/White
Pin 6
Green
Pin 7
Brown/White
Pin 8
Brown
Twisted Pair Wiring
Use TIA/EIA-568B wiring for Category 6
connection between send and receive
units.
RS232 Wiring
Connect the display device RX signal to
HD2-RX
TX on the DL-
the display device TX signal to RX on the
HD2-RX
DL-
extender.
extender. Connect