ACU-RITE 00828BPDI Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stacja pogodowa ACU-RITE 00828BPDI. ACU-RITE 00828BPDI 14 stron. Weather forecast station

Display screen

not working

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep

away from dust, dirt and moisture. Clean ventilation ports regularly with a

gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Calibrate Temperature & Humidity

The indoor / outdoor temperature and humidity readings can be calibrated on

the display unit to improve accuracy. Calibration can improve accuracy when

sensor placement or environmental factors impact your data accuracy.

1. To access calibration mode, press AND HOLD the " ", " ", and "

buttons for at least 5 seconds.

2. Once in calibration mode, the preference you are currently setting will blink

on the display.

3. Press the " " or " " buttons to calibrate the data value higher or lower

from the actual reading.

4. Press the "

" button to confirm the calibration adjustment. The "

will remain illuminated next to calibrated values.

5. The next adjustable data will begin flashing, indicating it is ready to be

calibrated. Repeat Steps 1 - 4 to calibrate additional data.

After 20 seconds of inactivity, the display will save the adjustments and exit

calibration mode. Note: Calibrations will be erased if the display is reset or if

batteries are removed.

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

• Reset the display by pressing the reset button, located

on the back of the display unit. Date and time will

need to be entered after a reset.

" icon