ARGENTO ALPHA Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Rower ARGENTO ALPHA. ARGENTO ALPHA 20 stron. Electric pedal-assisted cycle

6. ASSEMBLY

1. Carefully remove the bike from the

packaging, then remove all the protective

material, being careful not to scratch the

painted parts and not pull the bike cables.

The removal of the bike from the packaging

must be carried out by two adults, in order to

avoid injuries or crushing.

2. Insert the front wheel in the housings of the

front fork, tighten the wheel with the quick

closing device.

3. Make sure that the plastic rings of the front

mudguard are positioned on the respective fork

lowers. Insert the front mudguard between the fork

arch and the front wheel, positioning the upper

mudguard support between the front light and the

fork arch.

4. Tighten the bolt of the front light, make

sure that the front light is correctly aligned

with the center of the fork. Tighten the front

mudguard supports to the fork lowers using

the plastic rings.

5. Insert the handlebar stem in the

appropriate slot on the frame, then tighten the

bolt of the handlebar stem.

Make sure that the handlebar is in a central

position respect to the handlebar stem,

tighten the two bolts present in the aluminum

plate above the handlebar.

6. Make sure to orient the saddle and tighten

the seat post correctly with the appropriate

device on the frame as shown in the photo on

the right. Do not raise the seat post beyond

the limit marked on the seat post to avoid

breaking the frame and serious injuries

while riding.