Epson 7880 - Stylus Pro Color Inkjet Printer Instrukcja obsługi dla sieci - Strona 39

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla sieci dla Wszystko w jednej drukarce Epson 7880 - Stylus Pro Color Inkjet Printer. Epson 7880 - Stylus Pro Color Inkjet Printer 46 stron. Warranty statement
Również dla Epson 7880 - Stylus Pro Color Inkjet Printer: Skrócona instrukcja instalacji (1 strony), Podręcznik (12 strony), Ograniczona gwarancja (12 strony)

Epson 7880 - Stylus Pro Color Inkjet Printer Instrukcja obsługi dla sieci
Chapter 4
Troubleshooting

General Problems

Cannot configure the network interface or cannot print from the
network.
Cause
The printer settings or network settings may be
wrong.
Cannot print even if you have assigned the IP address to the
computer and the printer.
Cause
You have assigned an IP address to the
computer manually, but you assigned the IP
address to the printer by Automatic Private IP
Addressing (APIPA).

Unable to start EpsonNet Config.

Cause
You have added or deleted protocols after
installing EpsonNet Config.
The message "EpsonNet Config cannot be used because no
network is installed" appears when you start EpsonNet Config.
Cause
TCP/IP is not installed on the computer.
TCP/IP is installed on the computer, but its IP
address is not set correctly.
What to do
First, check to see if you can print a status sheet, as
described in "Printing a Network Status Sheet" on page
16. If you can print a status sheet, check the network
settings.
What to do
Assign the printer's IP address so that it belongs to the
same segment of the computer. Use EpsonNet Config
and the printer's control panel.
What to do
Uninstall EpsonNet Config and then reinstall it. See
"Uninstalling Software" on page 43.
What to do
Install the TCP/IP protocol.
Set a correct IP address for the computer.
39
Troubleshooting