Epson AcuLaser CX11N/CX11NF
Paper
Single sheets
Size
A4 (8.3 × 11.7 inches)
A5 (5.8 × 8.3 inches)
A6 (4.1 × 5.8 inches)
Letter (8.5 × 11 inches)
Legal (8.5 × 14 inches)
Half-letter (5.5 × 8.5 inches)
Executive (7.3 × 10.5 inches)
User Defined up to 8.66 × 14 inches
Paper type
Plain bond paper or special paper
distributed by Epson
Thickness
0.003 to 0.004 inch (0.08 to 0.11 mm)
Weight
17 lb (64 g/m²) to 24 lb (90 g/m²)
(for plain bond paper)
Envelopes
Size
No. 10 (4.1 × 9.5 inches)
DL (4.3 × 8.7 inches)
C6 (4.5 × 6.4 inches)
MON
C5
IB5
Paper type
Plain bond paper
Weight
20 lb (75 g/m²) to 24 lb (90 g/m²)
Note: Poor quality paper may reduce the print quality and cause
paper jams or other problems. If you have print quality problems,
switch to a higher grade paper.
Do not load curled or folded paper.
Use paper only under these conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
Since the quality of any particular brand or type of paper may be
changed by the manufacturer at any time, Epson cannot guarantee
the quality of any non-Epson brand or type of paper. Always test a
sample of paper stock before purchasing large quantities or printing
large jobs.
Always load paper into the sheet feeder with the short edge first.
Load envelopes flap edge left with the printable side up.
Loading Paper
You can load paper in the MP (multi-purpose) tray or the
optional paper cassette tray. All printed materials are output to
the output tray, shown on page 5.
4
Epson AcuLaser CX11N/CX11NF
-
Using the MP Tray
1. Open the MP tray cover.
2. Pinch the knob and paper guide together, then slide the
right paper guide outward.
MP tray cover
3. Load a stack of paper in the center of the tray with the short
edge first and the printable surface facing up. Pinch the
knob and the paper guide together and slide them against
the right side of the stack for a snug fit.
Note:
When loading paper, do not exceed the maximum stack height
marker inside the paper guide.
4. Close the MP tray cover.
Note:
After loading paper, press the
r
panel, press the
d
button to select Tray Menu, and match the MP Tray Size and
MP Type settings to the loaded paper size.
8/05
Setup button on the control
button to select Printer Settings, press the
Drukuj stronę