Epson AcuLaser CX21NF Instrukcja obsługi - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wszystko w jednej drukarce Epson AcuLaser CX21NF. Epson AcuLaser CX21NF 26 stron. Aculaser cx21 series
Drukuj stronęNote:
To display the details of the registered group,
press the Advanced/Menu button while
a group is selected. To return to the group
list again, press either the
Advanced/Menu button or the l Left
button.
5. Make the appropriate settings for your
scanning purpose if necessary.
Note:
When you press the x B&W Start button
without making any settings here, the fax
transmission starts with the existing setting
values.
6. Press the x B&W Start button to start the
transmission.
Receiving faxes
Basics of receiving faxes
When the product has an attached phone,
you can select from four reception modes for
receiving a call. The default is set to the Auto
switching mode.
Setting item
Auto
switching
Fax only
Phone only
EPSON AcuLaser CX21 Series Basic Operation Guide
Description
The call is received by the
attached phone and the
product automatically answers
after the phone rings for a
certain duration specified by
the Attached Phone Timeout
setting.
The product automatically
answers and receives the fax.
The phone rings at least one
time.
The call is received by the
attached phone. Fax
reception is not performed.
TAM
When an attached phone
detects a fax/phone signal
while answering an incoming
call, the product automatically
receives the fax.
To change the reception mode, follow the
steps below.
1. Press the
Setup button on the
control panel.
The Setup light is lit and the Setup menu
appears in the LCD panel.
2. Press the d Down button twice to select
Fax Settings, then press the r Right
button.
3. Press the d Down button twice to select
Reception Settings, then press the
r Right button.
4. Press the d Down button to select
Incoming Mode, then press the r Right
button.
The Reception Settings menu appears.
Basic Faxing (Fax Model Only)
13