Cisco Cisco Aironet Wireless LAN Client Podręcznik dla początkujących - Strona 20
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Bezprzewodowy punkt dostępowy Cisco Cisco Aironet Wireless LAN Client. Cisco Cisco Aironet Wireless LAN Client 38 stron.
Również dla Cisco Cisco Aironet Wireless LAN Client: Skrócona instrukcja obsługi (12 strony)
Drukuj stronę
13
Miscellaneous Usage and Configuration Guidelines
Using the Mode Button
Using the Mode button (see
• Reset the AP to it's default factory-shipped configuration
• Clear the AP internal storage including all configuration files
To use the mode button, press, and keep pressed, the mode button on the access point during the AP
boot cycle. Wait until the AP status LED changes to Amber. During this, the AP console shows a
seconds counter, counting the number of seconds the mode button is pressed. Then:
• To reset the AP to default factory-shipped configuration, keep the mode button pressed for less
than 20 seconds. The AP configuration files are cleared.
This resets all configuration settings to factory defaults, including passwords, encryption keys, the
IP address, and the SSID. However, the regulatory domain provisioning is not reset.
• To clear the AP internal storage, including all configuration files, keep the mode button pressed
for more than 20 seconds, but less than 60 seconds.
The AP status LED changes from Amber to Red, and all the files in the AP storage directory are
cleared.
If you keep the mode button pressed for more than 60 seconds, the mode button is assumed faulty and
no changes are made.
20
Figure
2) you can: