Epson C11CA18201 - WorkForce 600 Color Inkjet Instrukcja instalacji sieciowej - Strona 35
Przeglądaj online lub pobierz pdf Instrukcja instalacji sieciowej dla Wszystko w jednej drukarce Epson C11CA18201 - WorkForce 600 Color Inkjet. Epson C11CA18201 - WorkForce 600 Color Inkjet 41 stron. Using the control panel for wireless network installation
Również dla Epson C11CA18201 - WorkForce 600 Color Inkjet: Ważne informacje dotyczące konfiguracji (2 strony), Specyfikacje (2 strony), Biuletyn wsparcia produktu (5 strony), Podręcznik funkcji (28 strony)
Drukuj stronę
■
Reset the printer's network settings (see page 37) and perform a first-time
installation of the printer software. (See page 3 for wireless installations or
page 15 for wired installations.)
Printing is slow or the print is cut off
Print a Network Status Sheet (see page 36) and check the Signal Condition. If it's
poor, try moving the printer closer to your wireless router or access point. Avoid
placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large
metal objects such as a filing cabinet.
A dial-up connection dialog box appears when printing with EpsonNet
Print
If you use a dial-up connection for Internet access, you will see this message every
time you print. Try connecting to the Internet using a LAN connection or set your
dial-up connection to dial manually (Never dial a connection).
Scanning Problems
Cannot find the scanner or start Epson Scan
■
If you're using Mac OS X, make sure that you configured the Epson Scan
network settings (see page 29).
■
If network communication was interrupted while starting Epson Scan, exit
Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart,
turn the printer off and back on, and then try restarting Epson Scan. Check
the
Timeout Setting
Scan Help.
■
If you have a firewall or Internet security software installed, the search feature
in
EPSON Scan Settings
Network Status Sheet (see page 36), click
Enter address
■
If you are scanning a large document at high resolution, a communication
error may occur. If the scan did not complete, lower the resolution.
in
EPSON Scan Settings
may not work correctly. In this case, print a
, and enter the IP address manually.
. For details, see the Epson
EPSON Scan Settings
Troubleshooting
>
>
Add
35