Cisco Meraki Go GR10 Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Bezprzewodowy punkt dostępowy Cisco Meraki Go GR10. Cisco Meraki Go GR10 12 stron.

Collect Additional Hardware for Installation

You will need the following hardware to perform an installation:

A good mounting location is important to getting the best performance out of your GR10 access point. Keep the

following in mind:

1. The device should have unobstructed line of sight to most coverage areas. For example, if installing in an ofﬁce

ﬁlled with workspaces divided by mid-height cubicle walls, installing on the ceiling or high on a wall would be ideal.

2. Power over Ethernet supports a maximum cable length of 300 ft (100 m).

3. If being used in a mesh deployment, the GR10 should have line of sight to at least two other Meraki devices. A

Cisco Partner can help ensure that your AP placement is ideal.