ACU-RITE 02446 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stacja pogodowa ACU-RITE 02446. ACU-RITE 02446 14 stron. Rain gauge

Rain Gauge Installation

• To ensure accurate rain measurement, the rain gauge MUST be

placed on a flat, level surface.

• Ensure the rain gauge is not placed in a low spot that could become

flooded or in an area where there are obstructions above it.

DO NOT

1. Separate the rain gauge cover from the rain gauge base.

PLACE IN WATER OR

2. Locate the two holes on the rain gauge base.

IN UNEVEN OR LOW

SPOTS THAT MAY

3. Fasten the rain gauge base to a sturdy surface, like a deck railing or a fence

BECOME FLOODED.

post, with screws (included) using hand tools. (Power tools may slip during

installation, causing damage to the rain gauge.)

Setup is Complete

The rain gauge will now synchronize with the display. It may take a few minutes

for synchronization to complete. Please refer to the troubleshooting section of this

manual if anything appears to be functioning improperly.

DO NOT

PLACE IN AREAS WHERE

PLANT GROWTH CAN

GROW INTO CASE AND

OBSTRUCT RAIN FLOW

THROUGH COLLECTOR

SQUEEZE

SQUEEZE TABS TO OPEN

DO NOT

PLACE IN AN

AREA WITH

OBSTRUCTIONS ABOVE

INSTALL 2 SCREWS USING

HAND TOOLS ONLY.

THEN RE-ATTACH UPPER CASING

PLACE ON A LEVEL

SURFACE AT LEAST

3 FEET FROM THE

GROUND WITH NO

OBSTRUCTIONS ABOVE.