Cisco WAP131 Skrócona instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Cisco WAP131. Cisco WAP131 13 stron. Reboot and reset factory default settings
Również dla Cisco WAP131: Skrócona instrukcja obsługi (13 strony), Podręcznik (4 strony), Podręcznik (4 strony)
Drukuj stronę
Getting Started with the Configuration
6
To configure the Cisco WAP131, follow these steps to access the Wizard
and then the web-based Configuration Utility from your computer:
Connect the Cisco WAP131 to the same network (IP subnet) as your
S
1
TEP
computer. The factory default IP address configuration of the Cisco
WAP131 is DHCP. Make sure that your DHCP server is running and
can be reached.
See
"Incorrect IP Address" on page 8
information, or if you do not have a DHCP server.
Locate the IP address of the Cisco WAP131.
S
2
TEP
a.
The Cisco WAP131 can be accessed and managed by Cisco
Small Business network tools and services including the Cisco
FindIT Network Discovery Utility that enables you to
automatically discover all supported Cisco Small Business
devices in the same local network segment as your computer.
You can get a snapshot view of each device or launch the
product Configuration Utility to view and configure the
settings. For more information, see www.cisco.com/go/findit.
b. The Cisco WAP131 is Bonjour-enabled and automatically
broadcasts its services and listens for services being
advertised by other Bonjour-enabled devices. If you have a
Bonjour-enabled browser, such as Microsoft Internet Explorer
with a Bonjour plug-in, or the Apple Mac Safari browser, you
can find the Cisco WAP131 on your local network without
knowing its IP address.
You can download the complete Bonjour for Microsoft Internet
Explorer browser from Apple's website by visiting:
http://www.apple.com/bonjour/
c.
Locate the IP address assigned by your DHCP server by
accessing your router or DHCP server. See your DHCP server
instructions for more information.
Launch a web browser, such as Microsoft Internet Explorer.
S
3
TEP
In the Address field, enter the default DHCP address and press the
S
4
TEP
Enter key.
Enter the default user name of cisco and password of cisco in the
S
5
TEP
User Name and Password fields.
Click Login. The Wireless Access Point Setup Wizard appears.
S
6
TEP
6
for troubleshooting
Cisco WAP131 Quick Start Guide