Cisco WAP321 Arkusz danych - Strona 4
Przeglądaj online lub pobierz pdf Arkusz danych dla Bezprzewodowy punkt dostępowy Cisco WAP321. Cisco WAP321 8 stron. Reboot and reset to factory default settings
Również dla Cisco WAP321: Recenzja (6 strony), Skrócona instrukcja obsługi (13 strony), Broszura i specyfikacje (4 strony), Skrócona instrukcja obsługi (13 strony), Podręcznik (4 strony), Podręcznik (4 strony)
Drukuj stronę
Elegant, compact design with internal antennas and versatile mounting kit enables installation on a ceiling,
●
wall, or desktop.
Intelligent QoS prioritizes network traffic to keep critical network applications running at top performance.
●
Power-saving sleep mode and port control features help maximize energy efficiency.
●
Highly secure guest access enables safe wireless connectivity for visitors.
●
Support for IPv6 lets you deploy future networking applications and operating systems without
●
costly upgrades.
Specifications
Table 1 lists the specifications, package contents, and minimum requirements for the Cisco WAP321 Wireless-N
Selectable-Band Access Point with Single Point Setup.
Table 1.
Specifications
Standards
Ports
Switch
Buttons
Cabling type
LEDs
Operating system
Physical Interfaces
Ports
Power supply
Buttons
Lock slot
LED
Physical Specifications
Physical dimensions (W x D x H)
Weight
PoE
PoE
Peak PoE power
Network Capabilities
Network protocols
VLAN support
Number of VLANs
Multiple SSIDs
802.1X supplicant
802.11d
SSID to VLAN mapping
Auto channel selection
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Specifications
Description
IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.11i
(WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Ethernet, Power
Power button (on/off)
Reset
Category 5e or better
Power, Wireless, LAN
Linux
Gigabit Ethernet, 12V DC power with support for 802.3af PoE
Not included with access point, but supports external power 12V DC power jack (Energy Star 2.0 compliant
with Efficiency Level 5) and 802.3af PoE
Power (on/off) push button; Reset button
Slot for Kensington lock
Power, Wireless, Ethernet
6.66 x 6.67 x 1.38 in. (169.08 x 169.42 x 35 mm)
0.606 lb or 275g
802.3af
10.6W
IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.11i
(WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460), RADIUS, syslog, HTTP/HTTPS,
Simple Network Management Protocol (SNMP)
Yes
1 management VLAN plus 8 VLANs for SSID
8
Yes
No
Yes
Yes
Page 4 of 8