Cisco WAP361 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Cisco WAP361. Cisco WAP361 17 stron. Reboot and reset to factory default settings
Również dla Cisco WAP361: Podręcznik (4 strony)
Drukuj stronę
Welcome
Thank you for choosing the Cisco WAP361 Wireless-AC/N Dual Radio Wall
Plate Access Point with PoE. The Cisco WAP361 is an indoor concurrent
dual-band radio 802.11ac and 802.11n access point with integrated PoE
switch. -PoE Supplied by UL Listed I.T.E.
This guide provides the general layout of the Cisco WAP361, describe
how to deploy the Cisco WAP361 in your network, and describe how to
configure the Cisco WAP361. For additional information, see
www.cisco.com/go/300_wap_resources.
Package Contents
• Wireless Access Point
• Mounting Kit
• This Quick Start Guide
• Ethernet Cable
• Technical Support Contact
• Pointer Card China RoHS
• EU Directives 1999/5/EC Compliance Information (for EU SKU only)
Before You Begin
1
Before you begin the installation, make sure that you have the following
equipment and services:
• A computer with browser support for:
–
Internet Explorer 7.0 or later
–
Chrome 5.0 or later
–
Firefox 3.0 or later
–
Safari 3.0 or later
• Tools for installing the hardware
• FindIt tool for locating the access point
• One or more Ethernet network switches with PoE
• Mobile devices (iPhone, Android, etc.) via wireless setup SSID.
(Configure via Wi-Fi mobile device with a web browser.)
2
Cisco WAP361 Quick Start Guide