Cisco WAP571 Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Cisco WAP571. Cisco WAP571 15 stron. Manually connect access points to the network via power over ethernet (poe)
Również dla Cisco WAP571: Podręcznik (4 strony), Skrócona instrukcja obsługi (6 strony)
Drukuj stronę
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Off
Power
Solid (Green)
Solid (Blue)
Flashing (Blue)
Solid (Red)
Off
LAN
Solid Green
Flashing Green
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
Cisco WAP571 Wireless Access Point
Description
The WAP571 is out of power.
The Cisco WAP571 is normal; no wireless
client connected.
The Cisco WAP571 is normal; at least one
wireless client connected.
The Cisco WAP571 is upgrading the firmware.
The Cisco WAP571 fails to boot with both
firmware images.
No Ethernet link; FE Ethernet link is active or
10Mbps.
GE Ethernet link is active.
The WAP 571 is transmitting or receiving data.
6