CABINETS TO GO Findley & Myers CB33 Instrukcja montażu - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz CABINETS TO GO Findley & Myers CB33. CABINETS TO GO Findley & Myers CB33 5 stron. Lazy susan cabinets
Również dla CABINETS TO GO Findley & Myers CB33: Instrukcja montażu (9 strony)
Drukuj stronę
8.
Place the Right Side Panel (B2) and align the cam lock connectors with right rear side panel. ( Figure 8) Lock the cam lock connectors.
Place the Short Frame (A2) and align the cam lock connectors with the side panel (B2) and frame (A1) and lock the cam lock connectors.
9.
Place and attach door assembly (J) from Step 1 onto face frame (A2) using door hinges (g) and screws (d) (Figure 9)
Attach the short toe kick (H2) to long toe-kick (H1) with cam locks, then put onto the cabinet under the door. Make sure that all fit and lock the
cam lock connectors. Reposition the cabinet, laying it on the back panel,(Figure 10) lock cam locks to the frame under the door. Return cabinet to
upright position.
g
d
Qty 2
t
12
Q
y
Sets
10.
Installing the Corner Braces (Figures 11&12): Position and insert the 5 plastic
corner braces (b) in the locations shown in (Figures 11&12) secure them with ½"
screws (c). Install round buttons (a) onto the doors where they contact the frames.
a
b
c
4
5
Qty
Q ty
10
Qty
Figure 8
Figure 12
Figure 11
Page 4
J1
J2
Figure 9
E
Figure 10