Epson CX6600 - Stylus Photo Printer Skrócona instrukcja obsługi - Strona 43

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wszystko w jednej drukarce Epson CX6600 - Stylus Photo Printer. Epson CX6600 - Stylus Photo Printer 48 stron. Epson scan icm updater v1.20 (psb.2008.07.001)
Również dla Epson CX6600 - Stylus Photo Printer: Podręcznik Start Here (8 strony), Podręcznik informacyjny (4 strony), Podręcznik Start Here (8 strony), Podręcznik (14 strony), Aktualizacja instrukcji (2 strony), Instrukcja konfiguracji (2 strony), Aktualizacja (1 strony), Skrócona instrukcja obsługi (47 strony), Instrukcja obsługi (50 strony)

Epson CX6600 - Stylus Photo Printer Skrócona instrukcja obsługi
Do not touch the green IC chip on the side of the cartridge. This may affect normal
operation and printing.
If you remove an ink cartridge for later use, protect the ink supply area from dirt and
dust and store it in the same environment as the Stylus CX6600. Note that there is a
valve in the ink supply port, making covers or plugs unnecessary, but care is needed to
prevent the ink from staining items that the cartridge touches. Do not touch the ink
cartridge ink supply port or surrounding area.
LCD Panel Safety Instructions
Use only a dry soft cloth to clean the LCD display. Don't use liquid or chemical
cleaners.
If the LCD display is damaged, contact your dealer.
If LCD solution gets on your skin, wash it off thoroughly with soap and water. If it
gets in your eyes, flush them immediately with water.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
For United States Users
FCC Compliance Statement
43