CABINETS TO GO Findley & Myers MBC30 Instrukcja montażu - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz CABINETS TO GO Findley & Myers MBC30. CABINETS TO GO Findley & Myers MBC30 5 stron. Base microwave cabinet w/ bottom drawer
Również dla CABINETS TO GO Findley & Myers MBC30: Instrukcja montażu (8 strony)
Drukuj stronę
Instructions:
►
1.
Place the face frame (A) face down on a flat soft working surface to ensure that the
face is not scratched or damaged. (Figure 1).
2.
Install the Side Panels (Figure 2): Insert right and left side panels (B) into the grooves of
the face frame (A) and align the cam lock connectors (Figure 2). Lock the cam with a screwdriver
by t urning t he s crew 1 80° c lockwise ( Figure 4 ).
3.
Install the Bottom and Microwave shelf (Figure 3): Gently spread the side panels (B) and
insert (C) & (D) into the grooves of s ide panels (B) until they are seated in the face frame (A).
4.
Installing the Back Panel and Toe Kick (Figure 6): Before you start this step, put the
back panel (E) on a flat surface facing upward. Install the drawer slide supports (f) in the pre‐
spotted area on the back panel (Figure 5). The bottom of the slide supports should be facing
the bottom groove. Secure them with 2 screws each (e) (Figure 5). T hen install the back panel (E)
to the rear of side panels (B) (Figure 6). Align and lock each cam lock. Install the Toe Kick (F) by
locking the cam lock at both ends (Figure 6).
e
12
Qty
E
f
Figure 5
Top
g
A
Figure
B
A
D
C
B
Figure 3
e
f
f
1
B
Figure2
E
B
F
Figure 6
Page 3
Figure 4