Cisco 500 Series Podręcznik - Strona 19

Przeglądaj online lub pobierz pdf Podręcznik dla System konferencyjny Cisco 500 Series. Cisco 500 Series 40 stron. Stackable managed switches
Również dla Cisco 500 Series: Podręcznik z informacjami dotyczącymi bezpieczeństwa (42 strony), Podręcznik (4 strony), Quick Start Quide (13 strony), Skrócona instrukcja obsługi (21 strony), Arkusz danych (5 strony), Podręcznik użytkownika (4 strony), Podręcznik użytkownika (6 strony), Podręcznik użytkownika (46 strony), Podręcznik administracyjny (48 strony), Podręcznik (24 strony), Rozwiązywanie problemów i konserwacja (15 strony), Skrócona instrukcja obsługi (7 strony), Skrócona instrukcja obsługi (25 strony)

Drukuj stronę
Cisco 500 Series Podręcznik
Headsets
Table 9: Cisco Headset 500 Series Parameters for Cisco IP Phone 8800 Series
Cisco Headset
Cisco Headset
521 and 522
Cisco Headset
531 and 532
Cisco Headset
561 and 562
Table 10: Cisco Headset 700 Series Parameters for Cisco IP Phone 8800 Series
Cisco Headset
Cisco Headset
730
Related Topics
Set Up a Headset for a Single Phone
You can configure a single phone or a group of phones for headset support. To configure a group of phones,
use the Common Phone Profile.
Procedure
Step 1
Sign into Cisco Unified Communications Manager Administration as an administrator.
Step 2
Select Device > Phone
Step 3
Locate the phone associated with the user.
Phone Firmware
Phone Firmware
Release 12.1(1)
or later
Phone Firmware
Release 12.1(1)
or later
Phone Firmware
Release
12.5(1)SR1 or
later, and the
latest device
package
Phone Firmware
Phone Firmware
Release 12.7(1)
or later
Accessory Support
Product Specific
Description and Usage Guidelines
Configuration
Parameter
Side USB Port
The headset usually requires about 5 seconds to
upgrade.
Back USB Port
Side USB Port
The headset usually requires about 5 seconds to
upgrade.
Back USB Port
Wireless
The headset usually requires 5 to 15 minutes to
Headset
upgrade, and the base LEDs light in sequence to show
Hookswitch
the upgrade progress. The user can postpone the
Control
upgrade up to 4 times.
Side USB Port
If you are using the Y cable to connect the headset
base to the phone, then you must enable Wireless
Back USB Port
Headset Hookswitch Control.
If you are using the USB cable to connect the headset
base to the phone, then you must the appropriate USB
port.
Product Specific
Description and Usage Guidelines
Configuration
Parameter
Side USB Port
The headset usually requires about 5 seconds to
upgrade.
Back USB Port
Set Up a Headset for a Single Phone
Headsets
19