Cisco 7936 - IP Conference Station VoIP Phone Instrukcja obsługi systemu - Strona 33

Przeglądaj online lub pobierz pdf Instrukcja obsługi systemu dla System konferencyjny Cisco 7936 - IP Conference Station VoIP Phone. Cisco 7936 - IP Conference Station VoIP Phone 36 stron. Ip phone conference station
Również dla Cisco 7936 - IP Conference Station VoIP Phone: Instrukcja obsługi systemu (50 strony), Instrukcja obsługi telefonu (49 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (2 strony)

Drukuj stronę

Cisco 7936 - IP Conference Station VoIP Phone Instrukcja obsługi systemu

Chapter 43

Cisco Unified IP Phones

Table 43-6

phones, see the

Administration Guide.

Table 43-6

Phone Configuration Checklist for SIP Protocol

Configuration Steps

Step 1

Gather the following information about the phone:

•

Model (7905, 7911, 7912, 7940, 7941, 7960, 7961, 7970,

7971)

MAC address

•

Physical location of the phone

•

Cisco Unified CallManager user to associate with the phone

•

Partition, calling search space, and location information, if

used

•

Number of lines and associated DNs to assign to the phone

Step 2

If configuring the SIP phone in a secure mode, configure the SIP

Phone Port on the Cisco Unified CallManager Configuration

window.

Step 3

If security is required, complete the SIP Security Profile

Configuration. The SIP Security Profile gets added to the SIP

phone by using the Phone Configuration window.

Step 4

Configure the SIP Profile. The SIP Profile gets added to the SIP

phone by using the Phone Configuration window.

Step 5

If you are using NTP for the timing synchronization, configure

the NTP server by using the Phone NTP Reference Configuration

window. Add the NTP server to Date/Time Group Configuration

and then assign the date/time group to the device pool. Add the

device pool to the SIP phone by using the Phone Configuration

window.

Step 6

If you want the digits to be collected before sending them to

Cisco Unified CallManager, configure a SIP Phone Dial plan.

Add the SIP Dial Rule to the SIP phone by using the Phone

Configuration window

Step 7

Add and configure the SIP phone.

OL-14153-01

lists the configuration steps for Cisco Unified IP Phones that support SIP. For third-party SIP

Third-Party SIP Phone Configuration Checklist

Phone Configuration Checklist

in the Cisco Unified CallManager

Procedures and Related Topics

Phone Search, page 43-27

Cisco Unified CallManager

Cisco Unified CallManager Administration

Guide

Phone Security Profile

Configuration, Cisco