Digitax F1 plus Podręcznik użytkownika
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe Digitax F1 plus. Digitax F1 plus 2 stron. Taximeter
Również dla Digitax F1 plus: Podręcznik użytkownika (8 strony)
Drukuj stronę
Serial Nr. ................................................
Date of Installation .................................
Name .....................................................
...............................................................
Address .................................................
...............................................................
Tel n° .....................................................
WARRANTY TERMS
AND CONDITIONS
Digitax warrants this product to be free from defects
in materials and workmanship for a period of twelve
calendar months from the date of installation.
To obtain the benefi ts of this warranty, the registration
card must be completed and returned to the factory
or your national importer within 14 days of purchase.
In case the taximeter needs to be repaired, it must be
sent, free of transportation cost, back to the manufac-
turer or to the service center as indicated by the local
representative.
This warranty is void if the equipment is modifi ed or
misused in any way or serviced by unauthorized per-
sons.
No responsibility can be accepted for any loss or dam-
age caused in transit, except for repair or substitution
of defective parts. No other liability will be recognized
by Digitax for any kind of damage or loss to person
or goods.
SET TIME AND DATE
Settings
In order to manually programme the clock, please check
that you are in For Hire position (by OP) and then
press K1 and K3 at the same time. The sign "Time"
appears on the main display for a few seconds and then
For Hire and Stopped will fl ash at the same time.
In the two left digits of the main display, the day is dis-
played, in the right ones the month. On the secondary
display, in the left digit, the hours are displayed and
in the right ones the minutes. Please fi nd here below
the functions of the keys in this programming menu:
PROGRAMMING START:
PRESS K1 + K3 AT THE SAME TIME
K1 Sets the day number
K2 Sets the month number
K3 Sets the hour
K4 Sets the minutes
OP By pushing it, you move to the year set up
When you select the year to change by OP, K keys
have the following functions:
K1 Decreases the year of one unit
K2 Increases the year of one unit
K3 Sets the taximeter manufacturing year
PROGRAMMING END AND DATA CONFIRMATION:
PRESS OP
HOW TO CONVERT THE LOCAL
CURRENCY INTO EURO AND VICE-VERSA
IN HIRED & STOPPED MODE
DEPRESS and RELEASE K1 + K2 keys
to toggle from the local currency to Euro
and vice-versa
Day
Month
1
Hour Minutes
Push Together
2
Sets the
Day
3
Sets the
Month
4
Sets the
Hour
5
Sets the
Minutes
Press to set
the Year
6
7
Set the
Year
-
+
Press to end the programming and to confi rm data
User Manual
ver.1.0