Epson ET-4810 Series Zacznij tutaj - Strona 2
Przeglądaj online lub pobierz pdf Zacznij tutaj dla Wszystko w jednej drukarce Epson ET-4810 Series. Epson ET-4810 Series 4 stron.
Drukuj stronę
2
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Do not shake or squeeze the ink bottles. Do not touch
Caution:
the top of the ink bottle after its cap is removed.
3
Insert the ink bottle into the filling port, as shown below.
Do not force the bottle into position; each bottle is keyed
Note:
for each color.
4
Wait for the ink to fill the tank.
Do not squeeze the bottle or
allow it to contact any other
surface.
Ink flows into the tank and
Note:
stops automatically when the ink
tank is filled to the upper line. If ink
does not flow from the bottle, lift and
reinsert the bottle.
5
When the ink tank is full, remove the ink bottle and
securely close it with the bottle cap. Place the remaining
ink aside; you will need it later.
Do not leave the ink bottle inserted; otherwise the bottle
Note:
may be damaged or ink may leak. If any ink remains in the bottle,
store the bottle upright and top off the ink tank after completing
initial setup.
6
Securely close the black ink tank cap.
7
Repeat the previous steps for the other colors.
8
Close the ink tank cover.
9
Raise the control panel, then press the
turn on the product. The
If an error code appears, turn off the product and check
Note:
that no protective material has been left inside the product.
10
Select your language, country, date, and time settings.
You can change these settings later using the product's
Note:
control panel. For more information, see the online User's Guide.
11
When an Epson Smart Panel setup message appears on
the LCD screen, select the option to continue setup.
12
When the message to see the Start Here sheet appears
on the LCD screen, press and hold the
5 seconds.
13
Press the
start button to start ink charging. Ink charging
takes about 11 minutes.
When the
power light stops flashing, ink charging is
Note:
complete. Once initial setup of the printer is complete, you can
top off the ink tanks with any remaining ink. See the online User's
Guide for instructions.
Do not unplug or turn off the product, or open the
Caution:
inner cover while the product is charging or you'll waste ink.
After some ink is used for charging, the rest is available for
Note:
printing.
14
Press the OK button to proceed with initial setup.
power button to
power light flashes.
help button for