Cisco CP-7936 Instrukcja obsługi telefonu - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi telefonu dla System konferencyjny Cisco CP-7936. Cisco CP-7936 49 stron. Unified ip conference station

Drukuj stronę

1. Getting Started

Connect the power supply unit to the AC adapter port on the PIM, and plug the other end

Step 4

into a standard electrical power outlet in the wall.

If you are using the External Microphone Kit, connect each of the microphone extensions to

Step 5

the microphone jacks installed on the bottom of the

Cisco Unified IP Conference Station 7936. See Figure 2 for an illustration of this connection.

Tip

If you do not correctly connect the cables, PIM, power supply, and the microphone extensions,

the IP Conference Station will not work.

Use of non-Cisco-certified components may not work and may void the IP Conference Station

product warranty.

Startup Sequence

During the startup sequence, the LCD screen display shows the following messages.

Sequence Step

Startup—The startup process occurs about

15 seconds after power up.

Configuring IP address—These messages appear

when the protocol is configuring the IP address.

TFTP configuration—This message appears when

connectivity is established with the TFTP server.

Cisco Unified CallManager configuration—This

message appears when connectivity is established

with the Cisco Unified CallManager.

Cisco Unified CallManager registration—This

message appears while the device is registering

with the Cisco Unified CallManager.

Initialization complete.

LCD Screen Message Display

Cisco Systems, Inc.

Polycom Technology

Configuring IP

Press Menu to Reconfigure

Station IP: IP address

Contacting: TFTP Server

Opening: Cisco CallManager IP address

Registering

Press the Phone Key to get a dial tone