ACU-RITE 605 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stacja pogodowa ACU-RITE 605. ACU-RITE 605 6 stron. Wireless weather station + companion

Drukuj stronę

USING THE MAIN UNIT (continued)

Moon Phase:

The moon phase will automatically display based on the calender date. The moonphase

will not be displayed correctly unless the date and year are programmed correctly.

MAIN UNIT - OTHER ADJUSTMENTS

View Pressure History: To view air pressure from 0 (current) to the past 12 hours,

press the "PRESSURE" button. The hour is displayed in the small box in the pressure

portion of the upper display. Each time you press "PRESSURE", the value changes to

that of the previous hour.

NOTE: The main unit example Upper Display illustrated in section 5 shows what the

pressure is, the current hour being zero (0). This pressure history is available only after

the barometer has operated and kept pressure data for 12 continuous hours.

Barometer History Graph: The bar chart just below the air pressure display, shows the

pressure readings (range from +0.24 inHg to –0.24 inHg/ –8 hPa mb to +8 hPa mb) of

the current and past 1, 2, 3, 6 and 12 hour periods.

WEATHER FORECASTING

The main unit predicts weather conditions of the next 12 – 24 hours based on the

changes in atmospheric pressure. The coverage area is approximately 19-31 miles (30 –

50 km). The weather forecast is based on atmospheric pressure changes and is approxi-

mately 70-75% correct. As weather conditions cannot be 100% correctly forecasted, we

cannot be responsible for any loss caused by an incorrect forecast.

SUNNY

PARTLY CLOUDY

CLOUDY

Trend Indicators:

Arrow indicators beside the upper display outdoor temperature and humidity readings

show:

Rising

Steady

The arrow icons will indicate rising, steady or falling if the temperature or humidity

change is more than 1 unit (degree/percent) within an hour.

RAIN/SNOW

STORMY

(FLASHES)

Falling

USING THE MAIN UNIT (continued)

SETTING THE ALARM:

1) Hold "ALARM" for 5 seconds.

2) The hour number(s) and "SET" flash. Press + or - to enter the desired hour.

Press "ALARM" to confirm the hour setting.

3) The minute number(s) and "SET" flash. Press + or - to enter the desired

minute.

Press "ALARM" to confirm the minute setting.

To view the set alarm time, press the "ALARM" button during the normal operating

mode. Alarm time will display for five seconds. Then, the current time is displayed.

To Turn the Alarm On and Off: press the "ALARM" button and then the "+" button

during the normal operating mode. An alarm icon will appear when the alarm is on.

To Turn off the Alarm for 24 hours: To turn the alarm off for 24 hours, press the

"ALARM" button when the alarm sounds

Snooze:

When the alarm sounds, press the "SNOOZE" button to trigger the snooze feature. The

alarm is silenced for five minutes.

MEMORY:

Press the "MEMORY" button to view the minimum values (Inside/ Outside Temperature

and Humidity) for 5 seconds. Press the "MEMORY" button again to view the maximum

memory.

The memory will automatically refresh every 24 hours.

NOTE:The air pressure memory will not be cleared manually, but instead will be cleared

automatically every 12 hours.