Digitear TX-Box Instrukcja szybkiej instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Serwer Digitear TX-Box. Digitear TX-Box 7 stron.
Drukuj stronę1 - 2 Start-up screen :
By default the TX-Box is confi gured like a DHCP client. Because of this, during its fi rst use, and in the
case where no other TX-Box is a DHCP server on the network, a message will appear asking if it should
become a DHCP server.
This message will also appear if the TX-Box's network interface isn't connected to any device (switch or
Access Point).
DHCP Server : The DHCP server distributes the available IP addresses to the other elements on the
networks.
DHCP Client : The IP address is assigned by the DHCP server.
The transition from DHCP server to DHCP client, or vice versa, can be done in the corresponding TX-Box
(cf: TX-Box Technical Documenation).
WARNING : Confi guring two TX-Boxes as a DHCP server in a network with multiple TX-Boxes will lead to
confl icting IP addresses and a malfunctioning of the Digitear System during its use.
Channel
Status
Home
Beltpacks
In-ear
Overline-Systems - www-digitear.eu - [email protected]
QUICK INSTALLATION GUIDE
1
2
3
+3
+3
+3
+3
+3
+3
+3
Network not available!
+1
+1
+1
+1
+1
+1
+1
Network cable isn't
plugged, or TX-Box may be
0
0
0
0
0
0
0
in DHCP client mode.
Switch to DHCP server
-10
-10
-10
-10
-10
-10
-10
-20
-20
-20
-20
-20
-20
-20
4
5
6
7
+3
+3
+3
+3
+3
+3
+1
+1
+1
+1
+1
+1
0
0
0
0
0
0
-10
-10
-10
-10
-10
-10
-20
-20
-20
-20
-20
-20
8
+3
+3
+3
+1
+1
+1
0
0
0
-10
-10
-10
-20
-20
-20
Page 3/6