Cisco EX90 Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System konferencyjny Cisco EX90. Cisco EX90 50 stron. Telepresence system
Również dla Cisco EX90: Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (37 strony), Podręcznik użytkownika (49 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik dla początkujących (42 strony), Podręcznik użytkownika (45 strony), Instrukcja instalacji (6 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (7 strony), Instrukcja rozwiązywania problemów (37 strony), Instrukcja instalacji (2 strony), Podręcznik użytkownika (45 strony), Podręcznik użytkownika (37 strony), Podręcznik dla początkujących (46 strony)

Drukuj stronę

Cisco TelePresence System EX60 & EX90

Table of Contents

Creating a video conference

(Multiway

)

™

If your EX60 or EX90 is equipped with the optional

Multiway feature, you may call more than one to

initiate a video conference.

The maximum number of participants in a Multiway

conference depends entirely on the video

infrastructure implemented in your organization. If in

doubt, consult your System Administrator.

If you want to initiate a video conference, you must

call each participant one by one.

Note that the current call (or group of calls) must be

put on hold before you call the next participant.

Call settings. Those you call may have video systems

with different capabilities. One of them may, for

example, be on an ADSL system with limited bandwidth

(compared to the others). You may then set the Call

settings to a (normally lower) call rate suiting his or

her system before you call that person. However,

that call rate will affect that specific part of the video

conference only. Other participants will not experience

a lower call rate because of this.

D1501601 User guide EX60 & EX90

Getting started

Video meetings

Scheduled meetings

Place a call to the first

participant.

Call the next

participant in the usual

way.

Repeat the procedure from

, if

needed.

A maximum four video systems

(yourself included) and one audio call

may participate.

If you initiated the conference you will be able to terminate the entire conference as well.

The other participants, however, may only disconnect themselves from the conference.

Managing Contacts

The Settings

To add another

one, tap Hold (a)

followed by Add (b)...

Tap Add to place the second

call, initiating a conference. You

may adjust Call Settings before

you place the call, if needed.

Tap END to terminate the

conference.

User guide