Cable Electronics HSW44C Plus Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik matrycowy Cable Electronics HSW44C Plus. Cable Electronics HSW44C Plus 17 stron. 4x4 hdmi matrix switch with cat5 output and up to 60khz ir
Drukuj stronęOperation and IR Control
Source Side
Method A: Push-in Button
1. Use the "+" or "—" channel button on output channel to select which port to be changed.
"+": change selected output port in ascending order
"—": change selected output port in descending order
2. Push the "+" or "—" channel button on Input channel to select the HDMI input source
you want to display on this selected output
Method B: IR Remote Control
Choose the output port you want to make channel switch from
then press 1-4 channel button to choose the HDMI input source shown on the chosen
output display.
OUTPUT1 to OUTPUT4
13
Method C: Software Control through RS-232 or Ethernet port
HDMI Input Source
Selection Mapping Area
Software Control Menu
1. Setting button
Click Get button to read back device ID.
Click Set button to write device ID.
Click Rename button to open the String Table.
Click
RS-232 or Ethernet Control via Communication Selection.
Click Write To Device button to save the setting to matrix.
Click Read From Device to read the setting from matrix.
In the String Table, assign the captions for each input and output port for easy recognition.
HDMI Output Port
Selection Mapping Area
Status Indicator
14