Sony 2005 SXRD KDS-R60XBR1 Instrukcja demontażu - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja demontażu dla TV Sony 2005 SXRD KDS-R60XBR1. Sony 2005 SXRD KDS-R60XBR1 31 stron.

Chapter 6 - Q-Box & PD-Board Removal

Wire Holders

USB Cable

Small

Cover

Access & Removal of Q -Box & PD-Board

(Digital Module Block DMB )

Slide Out

Wire Holders

Screws

indicated by

red circles

DMB Outer

Shield

Connector

Cover

I-Link

Jack

Screws

(on side )

The Chassis only needs to be

slightly slid out to access the

screws and wire holders to

access the Q-Box and PD-

board.

Reference the "Complete PCB

Chassis" section for details to

free and slide out the chassis .

Remove all wires from wire

holders.

Disconnect USB cable

Remove 16 screws, Small

Cover, and the Connector

Cover to remove DMB outer

shield.

When all screws are removed,

pull the left-side of the shield

out first to clear the i -link

connectors on the right -side of

the shield.

Once i-link connectors are clear

pull shield straight off.