Sony BRAVIA KD-55XE7096 Instrukcja obsługi - Strona 22
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TV Sony BRAVIA KD-55XE7096. Sony BRAVIA KD-55XE7096 44 stron.
Również dla Sony BRAVIA KD-55XE7096: Instrukcja obsługi (44 strony)
Drukuj stronę
Sound
ClearAudio+
Let you enjoy the best sound quality by the
combination of a well-balanced digital
signal processing technology.
Sound Mode
Select according to content you want to
enjoy.
Reset
Reset [Surround], [Surround effect],
[Sound restoration (DSEE)], [Equaliser],
[Voice Zoom], [Advanced auto volume],
[Balance], and [Volume Offset] settings.
Surround
Virtually reproduce realistic surround
sound.
Surround effect
Adjust the surround sound effect.
Sound restoration (DSEE)
Reproduce the spatial natural sound
quality by decoding high frequencies and
small sound often lost by digital
compression.
Equaliser
Adjusts sound frequency settings.
Voice Zoom
Emphasize voice or ambient audio.
Advanced auto volume
Automatically compensates for the volume
level that may vary by programme or input.
Balance
Emphasises left or right speaker balance.
Volume Offset
Adjusts the volume level of the current
input relative to other inputs.
22
GB
Dual Sound
Sets the sound from the speaker to [Mono],
[Stereo], [A] or [B].
Note
• If the signal is very weak, the sound becomes
monaural automatically.
• If the stereo sound is noisy when receiving a
NICAM programme, select [Mono]. The sound
becomes monaural, but the noise is reduced.
• The [Dual Sound] setting is memorized for each
programme position.
• You cannot listen to stereo broadcast sound
when [Mono] is selected.
Hint
• If you select other equipment connected to the
TV, set [Dual Sound] to [Stereo], [A] or [B].
Advanced Settings
Dynamic Range: Compensates for
differences in the audio level between
different channels.
Note
• The effect may not function or may vary
depending on the programme regardless of the
[Dynamic Range] setting.
Dolby Digital Plus Out: Select [Auto] to
pass through Dolby Digital Plus
stream to ARC when Dolby Digital
Plus is available through connected
Audio System.
During Dolby Digital Plus stream is
output, Digital Audio Out (optical)* is
muted.
Select [Off] to convert Dolby Digital
Plus stream to Dolby Digital for both
ARC (Audio system) and Digital Audio
Out (optical)*.
HE-AAC Audio Level: Adjust the HE-AAC
audio sound level.
MPEG Audio Level: Adjusts the MPEG
audio sound level.
* Only on limited region/country/TV model.