Cisco Profile Series Podręcznik dla początkujących - Strona 38

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla System konferencyjny Cisco Profile Series. Cisco Profile Series 42 stron. Jbod on the 12g sas modular raid controller
Również dla Cisco Profile Series: Podręcznik dla początkujących (41 strony), Podręcznik użytkownika (44 strony), Podręcznik użytkownika (7 strony), Podręcznik dla początkujących (35 strony), Skrócona instrukcja obsługi (2 strony), Instrukcja instalacji (44 strony), Podręcznik konfiguracji (13 strony), Arkusz instalacyjny (2 strony), Instrukcja instalacji (2 strony), Skrócona instrukcja obsługi (4 strony), Skrócona instrukcja obsługi (4 strony), Instrukcja instalacji (16 strony), Podręcznik dla początkujących (32 strony), Podręcznik (16 strony), Podręcznik dla początkujących (46 strony)

Drukuj stronę

Cisco TelePresence Video Systems

Contents

The System Configuration page on

the web interface

You open the web interface by entering your video conference

system's iP address in the address bar of a web browser; then

you sign in.

When signed in, you can open the System Configuration page

from the Configuration menu.

You can access all configuration settings from this page.

All settings are not available on all products; therefore the folders

shown to the right may or may not be present on your system.

You can find a complete description of the web interface and

the settings in the administrator guide for your system.

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

Configuration

The System configuration menu

the settings are arranged with the following top level categories:

•

Audio:

Settings for microphones, audio outputs, echo control, volume, sounds,

alerts, and more.

•

Cameras:

Settings for focus mode, brightness, whitebalance, backlight compen-

sation, options like flip and mirror, and more.

•

Conference:

Conference settings like transmit and receive bit rates, bandwidth

allocation, incoming call handling, encryption, packet loss resilience and far

end control.

•

Experimental:

experimental settings are likely to change in future releases.

they can be used 'as is' and are not fully documented.

•

FacilityService:

Setting up speed dial buttons for facility services, e.g. Helpdesk.

•

GPIO:

definition of the GPio pins.

•

H323:

All H.323 protocol settings.

•

Network:

iP, VlAN and QoS settings.

•

NetworkPort:

enable/disable the codec's second ethernet port.

•

NetworkServices:

HttP, HttPS, SNMP, H323, SiP and NtP.

•

Phonebook Server:

•

Provisioning:

Settings for provisioning mode, manager address and protocols

and methods.

•

RTP Port Range:

•

Security:

Settings for an audit server and error logging.

•

SerialPort:

enable/disable the serial port, and set its baud rate.

•

SIP:

All settings for the SiP protocol.

•

Standby:

Configure when the system should enter standby and how it should

behave when entering/leaving standby mode.

•

SystemUnit:

Settings like system name and type, and menu language selection.

•

Time:

date and time settings.

•

User Interface:

touch controller settings.

•

Video:

Settings for video sources and monitors, and video display set-up and

layout.

Getting Started Guide

Appendicies

Appendices

enable/disable the network services: Multiway, telnet, SSH,

Phonebook type and location.

rtP port numbers.

Contacts