Argo CRONO Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Argo CRONO. Argo CRONO 16 stron. Local

Connect the power cord to a suitable electric socket (220–240 V). Insert the supplied batteries into the remote control

and make sure the poles match. Select the desired operating mode from the remote control.

Avoid tight bends or folds in the hose.

If the air conditioner is not used for prolonged periods, disconnect the pipe and plug the window unit.

This appliance can be used for cooling, dehumidifying and ventilation purposes.

Before using the appliance, leave it standing erect for at least two hours.

When switching between modes, the fan continues to turn but the compressor stops: the compressor will re-start after 3

minutes. This delay protects the compressor from potential damage.

Cooling, Fan

THE DRAINAGE TUBE MUST BE CONNECTED to the appliance AT ALL TIMES: the only exception is when the

appliance is used in dehumidification mode only, in which case the appliance should be left to discharge directly

into the room for maximum efficiency (see the "Dehumidification Mode" paragraph).

Clean the air filters under the easily removable rear grille regularly to keep the air conditioner working efficiently.

V 12/19

HOW TO USE THE APPLIANCE

Dehumidifying