Cisco TelePresence IX5200 Pierwsza konfiguracja - Strona 36
Przeglądaj online lub pobierz pdf Pierwsza konfiguracja dla System konferencyjny Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 stron.
Również dla Cisco TelePresence IX5200: Skrócona instrukcja obsługi (15 strony), Podręcznik użytkownika (26 strony), Instrukcja instalacji (36 strony)
Drukuj stronę
Performing First-Time Setup
When the test completes, verify that all of the appropriate FTS tests show a green check mark. All nine
Step 18
tests should show a check mark if your system includes a whiteboard. If your system does not include a
whiteboard, all tests should show a check mark, except Whiteboard Setup and Whiteboard Mic
Calibration.
If your system includes auxiliary displays, you must reboot the system for the displays to be detected.
Step 19
For more information, see
Displays" section on page
Requirements for the Whiteboard Microphone
The whiteboard microphone is used when a person at the whiteboard is speaking. It allows participants
to be heard while they are presenting.
The whiteboard microphone must fit the following characteristics:
•
•
•
Cisco TelePresence IX5000 and IX5200 First-Time Setup
36
"Reboot Required After First-Time Setup For Systems with Auxiliary
12.
The microphone must be omnidirectional (wireless or corded) and have a minimum frequency
response of 100Hz to 10KHz (+/- 3dB).
The microphone must include an adjustable preamp with a gain knob and power supply (maximum
input voltage +3dBV).
The output line must use a 3.5mm TRS connector to connect to the Host CPU codec.
OL-27038-01