Cisco TelePresence Systems
GettinG started Guide
Table of contents
Introduction
The Settings menu on the Touch
controller
All settings are not available on all products; therefore the
menu items shown to the right may or may not be present on
your system.
You will find a complete description of the Touch controller
menus in the User guide for your video conference system.
D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved.
User interfaces
Configuration
Settings | System Information
System Information
Call Status
Camera Control & Settings
Display Settings
Ringtone & Sound Settings
Background
Administrator Settings
Restart
Back
| Administrator Sett
Date, Time & Location
Call Settings
Network Settings
EMC Resilience Mode
Reset
Back
IP Settings
H323 Settings
SIP Settings
Provisioning
Multiway
Appendices
Appendices
The Settings menu
•
System Information:
See and overview of the system configurations.
•
Call Status:
See and overview of the call parameters when in call (e.g.
protocols, transmit and receive rates, packet loss).
•
Camera Control & Settings:
Set the camera parameters.
•
Display Settings:
Select brightness, color temperature and DVI mode for the
main video display.
•
Ringtone & Sound Settings:
Select a ring tone, the ring tone volume and key tone.
•
Background:
Select a background picture for your Touch controller and main
video display.
•
Administrator Settings:
See below.
•
Restart:
Select this option to restart the system.
The Administrator Settings menu
•
Date, Time & Location:
Configure date and time settings.
•
Call Settings:
Configure the default bit rate and auto answer settings.
•
Network Settings:
See below.
•
EMC Resilience Mode:
Select this option to change the Touch
controller's resilience to electromagnetic noise present.
•
Reset:
Select this option for a complete factory reset. All your settings
will be reset.
The Network Settings menu
| Administrator Sett
•
IP Settings:
Configure the IP settings.
•
H323 Settings:
•
SIP settings:
Configure the SIP settings.
•
Provisioning:
Start the provisioning wizard.
•
Multiway:
Insert the address of the Multiway server.
32
Configure the H.323 settings.
www.cisco.com
Drukuj stronę