Cisco TelePresence MX700 Podręcznik - Strona 22

Przeglądaj online lub pobierz pdf Podręcznik dla System konferencyjny Cisco TelePresence MX700. Cisco TelePresence MX700 45 stron. Single camera on a free standing floor stand or a floor stand secured to the wall
Również dla Cisco TelePresence MX700: Instrukcja instalacji (32 strony), Skrócona instrukcja obsługi (12 strony), Instrukcja instalacji (28 strony), Instrukcja instalacji (29 strony), Instrukcja instalacji (32 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (45 strony), Instrukcja instalacji (29 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik dla początkujących (46 strony)

Drukuj stronę

Slider

Table of contents

Introduction

Example of use: Dimmable lights, volume control.

Create a user interface

Events

Pressed

API for in-room control

Changed

Widgets

Released

Command reference

Troubleshooting

Tips and tricks

Examples

In-Room Control on Touch 10

for Cisco TelePresence

MX200 G2, MX300 G2,

MX700, MX800,

SX10, SX20, SX80

Collaboration Endpoint

software version CE8.2

Commands

D15358.02 - JULY 2016

www.cisco.com

The visual appearance of the slider changes immediately when you

tap or slide it. However, the control system must always send a

SetValue

the slider. This ensures that the status is updated accordingly.

Triggered when the slider is pressed

Value: N/A

Triggered when the slider is moved while holding down,

and when the slider is released

Value: 0-255

Triggered when the slider is released

Value: 0-255

command to the video system to tell the new position of

A slider selects values within a set range. The minimum value is

represented by 0, and the maximum value is represented by 255.

When the slider is being pressed and moved, events are sent

maximum 5 times a second.

When you tap the bar, the slider is immediately moved to that new

position.

Example:

Press the slider with WidgetId = "slider", and move it into a

new position ("68"), and release.

Terminal mode

*e UserInterface Extensions Event Pressed Signal: "slider"

** end

*e UserInterface Extensions Event Changed Signal: "slider:32"

** end

*e UserInterface Extensions Event Changed Signal: "slider:68"

** end

*e UserInterface Extensions Event Released Signal: "slider:68"

** end

<Event>

<WidgetId item="1">slider</WidgetId>

<Type item="1">released</Type>

</Action>

</Widget>

</Extensions>

</UserInterface>

</Event>

Example:

Set the slider with WidgetId = "slider" to position "98".

xCommand UserInterface Extensions Widget SetValue WidgetId: "slider"

Value: "98"

XML mode