Cisco TelePresence MX700 Podręcznik - Strona 25

Przeglądaj online lub pobierz pdf Podręcznik dla System konferencyjny Cisco TelePresence MX700. Cisco TelePresence MX700 45 stron. Single camera on a free standing floor stand or a floor stand secured to the wall
Również dla Cisco TelePresence MX700: Instrukcja instalacji (32 strony), Skrócona instrukcja obsługi (12 strony), Instrukcja instalacji (28 strony), Instrukcja instalacji (29 strony), Instrukcja instalacji (32 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (45 strony), Instrukcja instalacji (29 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik dla początkujących (46 strony)

Drukuj stronę
Cisco TelePresence MX700 Podręcznik
Button with symbol
Table of contents
Introduction
Example of use: Controls for a media player, or other devices that can start,
Create a user interface
stop, pause.
API for in-room control
Events
Widgets
Widgets
Pressed
Command reference
Released
Clicked
Troubleshooting
Tips and tricks
Examples
Commands
Use the
D15358.01 APRIL 2016
A value of
Collaboration Endpoint software
version 8.1
release it.
© 2016 Cisco Systems, Inc.
All rights reserved.
    
inactive
Triggered when the button is pressed
Value: N/A
Triggered when the button is released
Value: N/A
Triggered when the button is released
Value: N/A
command to highlight or not the button in the user interface.
SetValue
will highlight the button, and a value of
"active"
    
There are buttons with different symbols under the Icons tab in the library. Such
a button has similar behavior as a button with custom text.
active
A button has two states: active and inactive. You do not have to set the button in
active state when someone taps it; the button can be used to just send a signal
without changing its visual state.
Example:
*e UserInterface Extensions Event Pressed Signal: "symbol"
** end
*e UserInterface Extensions Event Released Signal: "symbol"
** end
*e UserInterface Extensions Event Clicked Signal: "symbol"
** end
.
.
.
<Event>
<UserInterface item="1">
</UserInterface>
</Event>
Example:
xCommand UserInterface Extensions Widget SetValue WidgetId: "symbol"
will
"inactive"
25
Press and release the button with WidgetId = "symbol".
Terminal mode
XML mode
<Extensions item="1">
<Widget item="1">
<Action item="1">
<WidgetId item="1">symbol</WidgetId>
<Value item="1"></Value>
<Type item="1">clicked</Type>
</Action>
</Widget>
</Extensions>
Highlight the button with WidgetId = "symbol" (set it in active state)
Value: "active"