Cisco TelePresence SpeakerTrack 60 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System konferencyjny Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 19 stron. Telepresence
Również dla Cisco TelePresence SpeakerTrack 60: Arkusz danych (3 strony), Instrukcja instalacji (14 strony), Podręcznik (22 strony), Instrukcja obsługi kamery (40 strony), Instrukcja obsługi kamery (44 strony)

Drukuj stronę

Cisco TelePresence SpeakerTrack 60 Instrukcja instalacji

Safety instructions

WaRnIng:

Use Ethernet cable only when connecting to the Ethernet port on the

camera. Do not connect a serial VISCA cable to the Ethernet port on the camera, as

this will cause severe damage to the camera.

note:

It is of great importance that the wall mount unit is safely installed, that the wall is able to

support the product and that the screws or mounting means used are suitable for the wall and

the weight of the product.

note:

According to the relevant international safety standard for IT products the wall is required

to support four times the actual load, which implies that the SpeakerTrack 60 must be mounted to

a wall which supports at least: 4 × 11.25 kg = 45 kg (4 × 24.8 lbs = 99.2 lbs).

note:

This type of equipment is to be installed by the submitter's/dealer's qualified installer.

The installer is responsible for obtaining safety inspection of the structural integrity of the

installation by the local authority/inspection department.

note:

Note that the surface is hot when the camera is in operation.

78-100223-02C0 | MARCH 2015.