Cisco TelePresence SX10 Podręcznik - Strona 26

Przeglądaj online lub pobierz pdf Podręcznik dla System konferencyjny Cisco TelePresence SX10. Cisco TelePresence SX10 45 stron. In-room control on touch 10
Również dla Cisco TelePresence SX10: Instrukcja instalacji (8 strony), Podręcznik użytkownika (26 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (34 strony), Podręcznik użytkownika (29 strony), Wstępna instrukcja obsługi (9 strony), Podręcznik użytkownika (38 strony), Instrukcja instalacji (8 strony), Podręcznik użytkownika (2 strony), Podręcznik użytkownika (37 strony), Podręcznik (45 strony), Instrukcja instalacji (2 strony), Podręcznik użytkownika (34 strony), Podręcznik użytkownika (5 strony), Podręcznik użytkownika (38 strony), Podręcznik użytkownika (38 strony), Podręcznik dla początkujących (46 strony), Skrócona instrukcja obsługi (2 strony)

Drukuj stronę

Group button

Table of contents

Example of use: Room presets that are

mutually excluding, like room presets

Introduction

where you can choose between Dark,

Cool, and Bright. Remember to deselect

(release) the preset, if it is no longer valid

(for instance when changing the lights

Create a user interface

with a wall control, or a Touch 10 slider.

Events

API for in-room control

Pressed

Widgets

Released

Command reference

Troubleshooting

Tips and tricks

Examples

In-Room Control on Touch 10

for Cisco TelePresence

MX200 G2, MX300 G2,

MX700, MX800,

SX10, SX20, SX80

Commands

Collaboration Endpoint

software version CE8.2

The visual appearance of the button changes immediately when you

D15358.02 - JULY 2016

tap it. However, the control system must always send a

www.cisco.com

command to the video system when one of the buttons are tapped.

This ensures that the status is updated accordingly.

Use the

that no button is highlighted.

Triggered when one of the buttons is pressed

Value: The Group ID of the button (within the group) that

was pressed

Triggered when one of the buttons is released

Value: The Group ID of the button (within the group) that

was released

command to release all buttons in the group so

UnSetValue

Groups of either two, three or four buttons with custom text are

Text

available. The buttons within a group are linked so that only one can

be selected at a time (also known as radio buttons).

No button selected

The size of the button determines the maximum number of

characters you can add. Text does not wrap to a new line. You

Text

cannot use the

One button selected

Example:

"groupbutton". Press the button with Group ID = "two".

*e UserInterface Extensions Event Pressed Signal: "groupbutton:two"

** end

*e UserInterface Extensions Event Released Signal: "groupbutton:two"

** end

<Event>

</UserInterface>

</Event>

Example:

group with WidgetId = "groupbutton". Then, release all buttons (no

buttons are highlighted).

SetValue

xCommand UserInterface Extensions Widget SetValue

xCommand UserInterface Extensions Widget UnsetValue

command to change the text dynamically.

SetValue

There are four buttons in the group with WidgetId =

Terminal mode

XML mode

<WidgetId item="1">groupbutton</WidgetId>

<Type item="1">released</Type>

</Action>

</Widget>

</Extensions>

Select (highlight) the button with Group ID = "one" in the

WidgetId: "groupbutton" Value: "one"

WidgetId: "groupbutton"