Sony BRU-SF10 Arkusz specyfikacji - Strona 3

Przeglądaj online lub pobierz pdf Arkusz specyfikacji dla Kamera Sony BRU-SF10. Sony BRU-SF10 22 stron. Hd optical multiplex unit
Również dla Sony BRU-SF10: Instrukcja obsługi (40 strony)

Drukuj stronę
Sony BRU-SF10 Arkusz specyfikacji
BRBK-HSD2
HD/SD-SDI output card
The BRBK-HSD2 provides HD-SDI signal when installed into the BRU-SF10 built-in card slot. By turning off data
mix, it enables various camera settings without displaying OSD on video out signal (main line). This can be used as an
optional card for the BRC-Z330*/-H900.
Note 1: Although the BRBK-HSD2 can be used with the BRC-Z330/1, in case of using with previous version of the
BRC-Z330, it requires version upgrade.
BRBK-SF1
1. HD optical multiplex card
The BRBK-SF1 provides high quality optical multiplex HD signal and audio line-in signal when installed into the
BRC-Z330* /-H900 built-in card slot.
Note: Although the BRBK-SF1 can be used with the BRC-Z330/1, in case of using with previous version of the
BRC-Z330, it requires version upgrade.
2. Audio line input
The BRBK-SF1 is equipped with phono jack for Audio input. By installing the BRBK-SF1 into the BRC-Z330/-H900,
image signal of the BRC-Z330/-H900 and analog audio signal received by the BRBK-SF1 can be simultaneously
transferred to the BRU-SF10 via single mode optical fiber cable. This is effective when a microphone is set near
the BRC-Z330/-H900 located in distant place while the BRU-SF10 located by an operator who needs both image and
audio at the same time.
CCFC-S200
Single mode optical fiber cable
The CCFC-S200 is a single mode optical fiber cable for connecting the BRC-Z330/-H900 (with BRBK-SF1) to the
BRU-SF10. The CCFC-S200 can transmit uncompressed digital data without any deterioration. It can be extended up
to 2000m (6,560 feet) using with supplied cable extension adaptor.
- 3 -