Cisco TelePresence SX20 Instrukcja instalacji

Drukuj stronę

Cisco TelePresence SX20 Instrukcja instalacji

Installation Guide for Cisco TelePresence SX20 Quick Set

SX20 Quick Set components

y SX20 Codec

y Ethernet cable for LAN

y Camera options

y Presentation cable:

A: PrecisionHD 1080p 12X

- VGA to DVI-A cable, or

B: Precision 40

- HDMI to DVI-D cable

y Table Microphone 20

y Power supply and

(1 default and 1 optional)

power cable

y User interface:

y Codec wall mounting kit

(optional)

- TRC6 remote control with

two AAA batteries, or

y Camera mounting bracket

- Touch 10 controller

(optional)

y HDMI cable for monitor

y Microphone extension cable

(1 default)

(optional)

y Camera cable

In addition to the SX20 Quick Set you must provide a monitor or

projector, and a loudspeaker (external or built-in to the monitor) to

complete your video conferencing system.

Documentation

https://collaborationhelp.cisco.com

https://www.cisco.com/go/sx-docs

Visit one of these web sites to find more information about the setup,

management, and use of this product. Also regulatory compliance and

safety information is included. Use the first link if your device is registered

to our cloud service, Cisco Webex; otherwise use the second link.

You may order the product without a camera.

Recommended room setup

The following should be regarded as

Camera

guidelines only. Try things out on-site

Place the camera at eye height to

before fixing any mounting positions.

get the best perceived eye contact.

Explore the Cisco Project Workplace

Typically, this is about 1.2 m (4 ft)

to find inspiration and guidelines when

above the floor.

preparing your office or meeting room

Use the camera self view function

for video conferencing,

https://www.

to make sure all participants are

cisco.com/go/projectworkplace

captured by the camera.

Aim for good illumination of a

person's face to avoid shadows. Also

avoid direct light on the monitor to

prevent reflections.

Camera options

Microphones

Option A: PrecisionHD 1080p 12X

Place the microphone(s) as close to

all meeting participants as possible.

Option B: Precision 40

本产品为 A 级 ITE，在其使用说明，铭牌等显著位置中已包含如下内容的声明

(We declare here that the subject product is A class ITE product, and the

following statement is clearly marked in the user manual or nameplate):

EMC Class A declaration

此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种

情况下，可能需要用户对干扰采取切实可行的措施。

WARNING:

This is a class A product. In a domestic environment this

product may cause radio interference in which case the user may be

required to take adequate measures.

声明所在位置 (Position of the Declaration):

Snap on the lens hood to

Typical room scenario:

prevent stray light from

Medium to large

meeting room.

disturbing your video

experience.

You can use the optional

70˚

camera bracket to place

the camera on top of the

monitor. Fasten the bracket

to the monitor with Velcro.

The camera snaps to the

magnets on the bracket.

You can use the optional

Typical room scenario:

camera bracket to place

Medium sized

the camera on top of the

meeting room.

monitor. Fasten the bracket

to the monitor with Velcro.

70˚

The camera is fastened to

the bracket with a screw.

Tool: 4 mm Allen Key (not

provided).

A 级声明 (A Class product declaration)

警告

This is a class A product. In a domestic environment this

使用说明 User Manual

