Sony BVP-E30 series Podręcznik - Strona 29
Przeglądaj online lub pobierz pdf Podręcznik dla Kamera Sony BVP-E30 series. Sony BVP-E30 series 34 stron. Sdtv portable cameras
Również dla Sony BVP-E30 series: Instrukcja obsługi (36 strony), Broszura i specyfikacje (14 strony), Instrukcja obsługi (38 strony)
Drukuj stronę
4-1. RCP Assignment Function Overview
The RCP assignment is the function that enables us to change combination of camera and CCU/HDCU from RCP without
changing the physical connection of the control cable. The RCP assignment function can be used in the MCS mode. (This
function can be set from the MSU that is set as Master, and cannot be set from the MSU that is set as Client.)
For example, the RCP-1 that is connected to the CCU/HDCU-1 in the following fi gure can control the CCU/HDCU-1 in the
default condition. However, it can also be used as an RCP for the other CCU/HDCU (for example CCU/HDCU-2) when the
RCP assignment function is used. In the same manner, the RCP-4 can also be used as the RCP for the CCU/HDCU-3 by
implementing the setting.
Camera head
1
Fiber cable
Triax cable
Camera head
1
Fiber cable
Triax cable
Camera head
Fiber cable
Triax cable
The RCP assignment is also possible in the system using the CNU. However, because the RCP assignment is possible for
only the equipment that is connected to the same CNU, combination is restricted in the system using more than 12 units.
We can get rid of such restriction by setting the network connection.
Camera Network System
Section 4
RCP Assignment
CONTROL
CCU/HDCU
CCU/HDCU-1
or
CCA-5 cable
CCU/HDCU
CCU/HDCU-2
or
CCA-5 cable
CCU/HDCU
CCU/HDCU-3
POWER
CABLE
CAM
ALARM
OPEN
MAIN
SHORT
INCOM
MIC
ON
PROD
OFF
PRIV
PGM
ENG
or
HD CAMERA CONTROL UNIT
LAN cable
RCP
RCP-1
RCP
RCP-2
HUB
LAN cable
LAN cable
CONTROL
LAN cable
MSU
MSU-1
Master
LAN cable
MSU
MSU-2
Client
RCP
RCP-3
LAN cable
RCP
RCP-4
LAN cable
4-1 (E)